Canon Printer Driver Issue

PRINTERS-SETUP.US is an independent support services provider. All of our names, trademarks and logos on this site are the properties of their respective owners only and are shown for the reference purposes only. Some common issues the user faces is the https://printers-setup.us/ printer is not online, the printer is not responding the command and paper jam etc. and there are various other problems as well. Below are some common ways to fix your Canon printer issue.

Printer not set as default- computer automatically assign the default printer to the connected printer but in some cases this changes, and you need to manually change the device for the command you are using the printer. You need to log in into the system as the administrator so that you can have the admin access and by thus only you can the preference of the printer.

 

2.   Driver Issue- if your printer is not printing the command then in that case you need to check for the Canon Printer Driver software. If you are using the latest operating system which is Windows 10 then your Driver software will automatically be updated.

 

3.    Hardware status- if your printer doesn’t work even after the above steps than it might be case of hardware issue. First check the ink in your Canon Printer or there must be paper jammed to your printer which is denying the further command of the printing.

 

4.     Not using printer for long time- If you haven’t to use your printer for a very long time then it one of the reason that your printer is not able to complete the command. This because ink in the printer evaporates and blocks the spouts.

 

5.  Other causes- in this case a virtual canon printer setup gets attached to the printer when you are installing a software or a product and when you give the command to the actual printer it doesn’t complete the command. This problem can be solved by going into the control panel of the system.

 

6.    Clear the head of the printer- Open the Canon Printer software and go the Properties tab and after that click on the option “Test Alignment” and after that wait for the printer to finish the alignment and after that print out the test page. Just to check that whether the page has been printed out properly or not.